Which is the cad partition command?

This article will explain in detail what the cad equalization command is, and the editor thinks it is very practical, so I share it for you as a reference. I hope you can get something after reading this article.

The CAD commands are as follows: 1. The command is "DIV", which means to arrange point objects or blocks at equal intervals along the length or perimeter of the object. 2, the distance is divided equally, the command is "ME", which means to place the point object or block at a specified interval on the object.

The operating environment of this tutorial: windows7 system, autocad2020 version, Dell G3 computer.

There are two CAD moderate commands:

First, divide the number equally. The command is DIV, which means that point objects or blocks are arranged at equal intervals along the length or perimeter of the object.

Take CAD2010 operation as an example:

Open the CAD software, as shown, draw a line segment on the CAD drawing, and then enter the DIV command.

After the above drawing is finished, you need to click the enter key, as shown in the figure, and select the objects to be divided into equal parts.

Finally, after selecting, enter the number that needs to be divided equally in the command window, as shown in the figure, press enter to see that the line segment on the page has become a dotted line, indicating that the division has been successful.

Second, the distance is divided equally, and the command is ME, which means that the point object or block is placed at a specified interval on the object.

This is the end of the article on "which is the cad equalization command". I hope the above content can be helpful to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.