Shulou(Shulou.com)06/01 Report--

In this issue, Xiaobian will bring you about how to solve the problem that Raspberry Pi does not recognize RTL8188eu wireless network card chip. The article is rich in content and analyzes and narrates from a professional perspective. After reading this article, I hope you can gain something.

Recently, I was tossing about the Raspberry Pi. I didn't pay attention at that time. For the sake of price, I bought Mercury's Mercury network MW150US ultra-small 150M wireless USB card. But the tragedy is that iwconfig does not recognize this wireless card

However, if you use lsusb, you can see that MW150US uses RTL8188eu chip. After searching on the network, I finally found the solution.

1. First, download, compile and install the latest linux kernel

2. Then continue to download and install RTL8188eu driver

$ git clone --depth 1 https://github.com/lwfinger/rtl8188eu$ cd rtl8188eu$ make && make install

3. At this time, you can use iwconfig to see wlan0.

4. Then it is best to reboot, then activate the wireless network card and scan the wireless network.

$ ifconfig wlan0 up$ iwlist wlan0 scan

5. The last is to configure the wireless network username and password, which will not be detailed here.

The above is how to solve the problem that the Raspberry Pi does not recognize the RTL8188eu wireless network card chip. If there is a similar doubt, please refer to the above analysis for understanding. If you want to know more about it, please pay attention to the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.