How to configure and manage the switch in Packet Tracer

It is believed that many inexperienced people don't know what to do about the basic configuration and management of the switch in Packet Tracer. Therefore, this paper summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem.

Experimental purpose:

Master the configuration and management of the switch.

Preparation and purpose of the experiment:

Connect the PC to the switch with console in Packet Tracer.

Enter privileged mode (en) global configuration mode (conf t) switch port view mode (int f0can1)

Reload restart (in privileged mode)

Modify switch name (hostname X) configure switch port parameters (speed,duplex)

View the switch version information (show version) (show run) of the current device.

The process of the experiment:

Connect the pc and the switch as shown.

Enter privileged mode, global configuration mode, port view mode, Reload.

View the switch version information and modify hostname X.

Run the set configuration, and the results are as follows.

After reading the above, have you mastered the basic configuration and management of the switch in Packet Tracer? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!