Shulou(Shulou.com)06/01 Report--

Allot traffic management equipment supports the management of command line mode (hereinafter referred to as CLI), which is the advanced management mode of Allot traffic management equipment. It can log into CLI through three ways: Super Terminal, SSH and Telnet. When logging in to the CLI interface using HyperTerminal, the baud rate is set to: 19200, data bit: 8, parity: n (none), stop bit: 1; SSH2/telnet directly logs in to the device address

The usernames that can be used for login in the three ways are root and sysadmin

Upgrade NetXplorer

1. First uninstall the original database and java6 on the 1.1.1.1 server, uninstall the NetXplorer system and restart the server

2. Install java 7

3. Reinstall the NX12.3.1 version

4. Install sybase

5. Configure NetXplorer and restart the backend service

6. TelnetAC1020 clears SNMP records

7. Import NetEnforcer in NetXplorer

8. Enter the AC1020 password, allot,IP address 1.1.1.60

9. Upgrade the protocol library

Upgrade AC1020 system

1. Upload the upgrade package to the AC1020 device.

2. Execute the. / command to upgrade the equipment system.

3. Execute go config key NE-XXXXXXXXXXXXXX is a command function is to update the device license

4. Actype can view device information. The go config view command function is to query the basic configuration status of the device.

5. Restart the device with Reboot, complete.

6. Optimize the adjustment policy and increase the policy to limit the maximum bandwidth of each host.

7. Establish Pipe before you can establish VC under Pipe and flow control policy under VC

If the management port often fails to deal with it:

The IP address limit is set in NX- configuration-Security, allowing only the server address 1.1.1.1 to access the management port 1.1.1.60.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.