Implement inter-VLAN routing
First, the purpose of the experiment:
Learn how to configure SVI ports on layer 3 switches to achieve inter-VLAN routing.
2. Experimental equipment:
One layer 3 switch. One two-layer switch.
Third, the experimental principle:
In a switched network, a physical network is logically divided by VLAN. If there is no direct access between different VLAN, it must be connected through layer 3 routing devices.
Fourth, the experimental steps:
1. Divide the VLAN and add ports on the layer 3 switch, and set trunk.
2. Divide the VLAN add ports on the layer 2 switch, and set the trunk
3, view VLAN and trunk.
4. Configure svi port on layer 3 switch
5. View
6. Verify the configuration
