How to choose area printing for CAD

This article will explain in detail how to choose regional printing for CAD. The editor thinks it is very practical, so I share it with you as a reference. I hope you can get something after reading this article.

CAD selection area printing method: first enlarge the printed drawings; then select [File-print-print Settings-window], and click the left mouse button to select the area of the paper to be printed; then click Preview; finally click OK to print.

CAD select area printing method:

1. Open the CAD software and the drawings that need to be printed, which are so dense that you only want to print one of them. How do you choose?

2. Mouse pulley. First of all, you enlarge the drawings that need to be printed and demonstrate the area with a blue box.

3. Select the file → print → print Settings → window

4. after selecting the window, go back to the page, click the left mouse button to select the drawing area to be printed (blue area), and then click the mouse

5. Then the print interface will appear again. For safety's sake, I am used to previewing before printing. Click on the full preview to see whether it is suitable for horizontal or vertical printing.

6. This is the effect of the preview. You can see that the drawing is suitable for vertical printing. Press the ESC key to return to the print interface, and select the vertical (vertical version). If the preview effect is OK, press the ESC key to return to the print interface, click OK, and the print begins.

This is the end of the article on "how to choose regional printing for CAD". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.