Cisco65 switch Series FWSM Firewall Module login password reset

The default boot partition of the FWSM module is CF:4, and the maintenance partition is CF: 1

By default, the FWSM boots from cf:4.

To reset the FWSM login password:

1. Restart the firewall module in cf:1 mode to enter the FWSM maintenance partition

# hw-module module mod_num reset cf:1

two。 Enter the FWSM template through the session command

# session slot mod_num processor 1

3. The default account for logging in to FWSM maintenance zone is root/cisco. After entering the FWSM maintenance system, you can clear and reset related passwords through clear-related commands.

# clear passwd cf:4 (reset FWSM login password)

The output is in the following format:

Root@localhost.localdomain#clear passwd cf:4

Do you wish to erase the passwords? [yn] y

The following lines will be removed from the configuration:

Enable password 9KPcNpn94rlu8z encrypted

Passwd 0JwOL8MWsnsUL encrypted

Do you want to remove the commands listed above from the configuration? [yn] y

Passwords and aaa commands have been erased.

4. After resetting the relevant password, exit the FWSM maintenance system, restart the firewall module in cf:4 mode, and enter the FWSM operating system.

# hw-module module 4 reset cf:4

5. After the firewall module restarts steadily, you can enter the FWSM operating system with the default account cisco/cisco.

# session slot 4 processor 1

The default escape character is Ctrl- ^, then x.

You can also type 'exit' at the remote prompt to end the session

Trying 127.0.0.41... Open

User Access Verification

Password: cisco

Type help or'?' For a list of available commands.

FWSM-HZ > en

Password: cisco

FWSM#

Reference address:

Http://sns.clnchina.com.cn/space.php?uid=364772&do=blog&id=4614

Welcome to group 166684620 to communicate together.