How to label coordinate points quickly by cad

This article will explain in detail how to quickly mark coordinate points in cad. The editor thinks it is very practical, so I share it with you as a reference. I hope you can get something after reading this article.

Cad method for quickly marking coordinate points: first download the coordinate annotation plug-in; then click [tools-load Application], and select the downloaded plug-in; then select [OK] in the pop-up dialog box; finally, click the intersection of the two axes in the station, and then go to the blank to determine.

The method of quickly marking coordinate points by cad:

1. First of all, download the coordinate tagging plug-in on Baidu, because the editor used to download several plug-ins on the Internet before to find the correct plug-in. You can download it on the Internet, download it, decompress it and store it where you can easily find it.

2. Then we can open the cad drawing and mark it. As shown in the figure, we mark the coordinates of the four piles.

3. Click "tools" in the drawing bar-"load applications"

4. Enter "ap" in the command bar and press the "Enter" key

5. Find us in the pop-up "load Application" dialog box and place the "zbbz" we downloaded in the first step.

6. Select "zbbz" in the "name" column, then click "load" in the middle, the command bar below prompts "load successfully", and then we click "close" in the "load Application" dialog box.

7. Then we can do the annotation. Type "zbbz" in the command bar, and then press the "Enter" key.

8. Align its properties in the pop-up "coordinate callout" settings dialog box, and then click "OK"

9. Then click the intersection of the two axes in the station, and then go to the blank to determine, that is, click twice to mark the coordinates of the pile.

10. next, you don't have to click load again, you can directly dimension other coordinate dimensions continuously.

About cad how to quickly mark coordinate points to share here, I hope the above content can be of some help to you, can learn more knowledge. If you think the article is good, you can share it for more people to see.