Telnet remote login of Huasan simulator
Telnet remote login of Huasan simulator
1. Open a server on the simulator and start the device, connecting to a local host, as shown in the figure
two。 Open the MSR36-20room1 device and configure it (1) the IP address of the network connected port (2) turn on the Telnet server function (3) enter the vty user interface (4) configure the password (5) set the server type (6) set the user level, as shown in the figure
3. Add a virtual network card to the machine, as shown in the figure
4. Configure the IP address on the virtual network card, as shown in the figure
5. Open the Telnet client in the control panel, as shown in the figure
6. Open a command prompt and enter ping 192.168.0.254, as shown
7. Enter telnet 192.168.0.254 at the command prompt with a password of 123456, as shown in the figure
