What do you mean by a cpu fan error error?

This article will explain in detail what the cpu fan error error means. The editor thinks it is very practical, so I share it with you as a reference. I hope you can get something after reading this article.

The appearance of cpu fan error indicates that CPU did not detect the fan speed during post. The solution: 1, open the chassis to check whether the CPU fan is connected to the corresponding interface of the motherboard; 2, resolve the BIOS setting error by restoring the default state.

Some users found that the screen showed an error message of "CPU Fan Error" after the computer was turned on, which indicated that CPU did not detect the fan speed during post.

There are five ways to do this.

Method 1:

If an incorrect connection of the CPU fan leads to a CPU Fan Error prompt, open the chassis and check that the CPU fan is connected to the corresponding connector on the motherboard.

Method 2:

1. Press the DEL key to enter the BIOS and the Hardware Monitor of POWER after booting.

2. Change the CPU FANSPEED item to the IGNORED,CHASSIS FANSPEED item, change the NumberA power FANSPEED item to IGNORED, and then see if there will be an error prompt.

Method 3:

Or due to some BIOS setting errors, you can restore the default state to solve, or directly remove the motherboard battery, wait a moment and then reinstall, through the motherboard power failure can also achieve the goal.

Method 4:

CPU fan speed is too low may also be caused by fan quality, use time, too much dust and other factors, you can replace the CPU fan to solve.

Method 5:

The floppy drive can be turned off by setting DisketteA to "None" through the BIOS setting (usually An is the floppy drive).

This is the end of the article on "what does cpu fan error error mean?". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.