1. QOS speed limit configuration of CISCO switch
CISCO switch QOS speed limit configuration steps:
1. Enable global qos
2. Set the traffic matching with ACL
3. Set a class-map to match the ACL set in the second step
4. Set a policy-map matching class-map, and then define a series of policies in which the limited bandwidth is calculated in bit and the burst is calculated in byte.
5. Apply policy-map to the corresponding interface
Mls qos
Ip access-list extended list83
Permit ip host 192.168.120.83 any
Class-map class83
Match access-group name list83
Policy-map policy83
Class class83
Trust dscp
Police 5000000 80000 exceed-action drop
Interface f0/11
Service-policy input policy83
