Shulou(Shulou.com)06/02 Report--

This article is to share with you about why the printer has slowed down. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

The reasons for the slow down of the printer: 1, there is a problem with the printer itself, and the printing speed has been slowed down; 2, the data transmission speed is slow; 3, the belt of the printing equipment is aging; 4, there is a problem with the wiring of the continuous supply, which hinders the movement of the word car; 5. After using it for a long time, the friction between the word car and the connecting rod in the machine increases, and the resistance increases, which leads to the slow operation of the electric motor.

There are six main reasons for slow printing:

1, the problem of the machine itself: many machines can adjust the printing speed, just adjust it on the machine.

2, slow data transmission speed: data transmission takes time, which is related to the path of data transmission (computer output port, data line itself transmission speed, printer receiving data port).

3. The belt aging of the printing equipment, and the friction change of the driving gear connected to the motor will accelerate the belt aging of the printer. At this time, cleaning and lubrication can reduce the belt aging fault.

4. It is necessary to pay attention to the wiring of the continuous supply, so as not to cause the pulling situation to hinder the movement of the car. As the internal structure of different printers is somewhat different, and does not provide refitting support, therefore, the routing problem has become the most common problem encountered in refitting and supplying.

5, lubricate the connecting rod, sometimes the low-speed printing is because it has been used for a long time, the friction between the car and the connecting rod in the machine becomes larger, and the resistance increases, which leads to the slow operation of the electric motor.

6. Replace the motor, when the rubber hose of the continuous ink supply system is rubbed against the wall of the printer, which leads to the increase of the load of the electric motor and the loss of the electric motor for a long time.

Thank you for reading! This is the end of the article on why the printer has slowed down. I hope the above content can be of some help to you, so that you can learn more knowledge. If you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.