How to disassemble the computer cpu fan

This article mainly introduces the relevant knowledge of "how to disassemble the computer cpu fan". The editor shows you the operation process through the actual case. The operation method is simple, fast and practical. I hope this article "how to disassemble the computer cpu fan" can help you solve the problem.

1. Use a flat screwdriver or hand to loosen the tightening fastening bolt at the four corners of the CPU fan.

two。 Pull up the fan and tighten the bolt post at the four corners.

3. Then unplug the power cord between the fan and the motherboard.

4. At this point, you can remove the fan directly by hand.

5. Let's take a look at the principle of the fixed bolt foot of the fan. it is composed of two pieces of plastic as a tension bolt, and a tension bolt is inserted in the middle.

6. When the expansion bolt is inserted into the fan fixing hole of the motherboard, and then the tension bolt is inserted between the two expansion plugs, so the fan can be fixed and pressed on the CPU, so it is only necessary to operate in the opposite direction when disassembling.

This is the end of the introduction about "how to remove the computer cpu fan". Thank you for your reading. If you want to know more about the industry, you can follow the industry information channel. The editor will update different knowledge points for you every day.