How to use Huawei ONU as an ordinary switch and divide it into VLAN, model (Huawei MA5626,MA5620)

The summary is as follows:

Port isolation configuration:

Undo isolate port 0Universe 13 removes port quarantine

Isolate port 0Universe 13 turns on port isolation

Divide the VLAN configuration:

If prompted by Failure: Service virtual port has existed already to delete the existing entries first

Undo service-port 0 undo service-port 1

Then add the divided port VLAN

1. First create VLAN 10

(conf) # service-port 1 vlan 10 eth 0 *

Note: the rx-cttr tx-cttr sending and receiving direction is bound to the traffic template (an index value of 6 / 6 means unlimited speed)

Huawei MA5626 ONU configuration city switch

# vlan service-profile-id 1 (module number: 1)

# user-bridging enable

# commit

# quit

# vlan bind service-profile 3 (vlan number: vlan3) profile-id 1 (module number: 1)

Configure the business flow:

# service-port vlan 3 eth 0/1/1 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6

# service-port vlan 3 eth 0/1/2 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6

Specializing in dealing with Huawei ONU (MA5616,M5626,MA5620,MA5612,MA5680T) and other fault problems!

Contact Yang Gong: 13645510438