The solution of cad Dot Dash is not obvious

This article will explain in detail the solution to the inconspicuous dotted line of cad. Xiaobian thinks it is quite practical, so share it with you for reference. I hope you can gain something after reading this article.

The solution of cad dotted line is not obvious: first click "linear control" block with mouse; then select "other" option with mouse in drop-down list; then adjust "global scale factor" to 100 in pop-up "linear manager" dialog box; finally click "ok" to complete setting.

CAD dot line is not clear, need to zoom in to see clearly, or too large need to shrink, are caused by inappropriate global scale, let's solve this kind of problem.

First, click the mouse "linear control" block selection.

Pop-up drop-down list, mouse select "Other" option.

Pop-up the "Linetype Manager" dialog box, adjust the "Global Scale Factor" to 100 (this is adjusted according to the drawing scale, and the scale used by Haihuan is 1:100.).

Click "OK" to complete the settings.

In this way, our dotted line will be adjusted!

About "cad dot line is not obvious solution" this article is shared here, I hope the above content can be of some help to everyone, so that you can learn more knowledge, if you think the article is good, please share it for more people to see.