Huawei Wireless AC,AC case

Basic configuration of the router

[Huawei] interface GigabitEthernet 0/0/2

[Huawei-GigabitEthernet0/0/2] ip address 11.0.0.1 30

[Huawei] int LoopBack 1

[Huawei-LoopBack1] ip add 1.1.1.1 30

Configuration of AC

Planning vlan: vlan 102is the uplink and router interface vlan, vlan100 is the AC management vlan, vlan101 is the AP issuing service vlan.

[AC6605] vlan batch 100 101 102

[AC6605] dhcp enable

[AC6605] int vlan 100

[AC6605-Vlanif100] ip address 192.168.100.1 24

[AC6605-Vlanif100] dhcp select interface

[AC6605] int vlan 101

[AC6605-Vlanif101] ip add 192.168.101.1 24

[AC6605-Vlanif101] dhcp select interface

[AC6605-Vlanif101] dhcp server dns-list 8.8.8.8

[AC6605] int vlan 102

[AC6605-Vlanif102] ip address 11.0.0.2 30

[AC6605] ip route 0.0.0.0 0 11.0.0.1

[AC6605-GigabitEthernet0/0/2] port hybrid pvid vlan 102

[AC6605-GigabitEthernet0/0/2] port hybrid untagged vlan 102

Configure the wlan feature of AC

[AC6605] wlan ac-global carrier id cmcc ac id 1 AC number is 1, operator is cmcc

[AC6605] wlan

[AC6605-wlan-view] ac sysnetid ac01 network element name is ac01

[AC6605-wlan-view] Management vlan100 for wlan ac source interface vlan100

Por establishes a tunnel for the following AP

[AC6605] interface GigabitEthernet 0/0/1

[AC6605-GigabitEthernet0/0/1] port link-type trunk

[AC6605-GigabitEthernet0/0/1] port trunk pvid vlan 100

[AC6605-GigabitEthernet0/0/1] port trunk allow-pass vlan 100 101

Configure AP to go live

[AC6605] wlan

[AC6605-wlan-view] MAC authentication of AP for ap-auth-mode mac-auth

[AC6605-wlan-view] ap id 1 type-id 19 mac 00e0-fc7a-39a0 enter the MAC address of ap

Configuration area

[AC6605-wlan-view] ap-region id 1 is equivalent to establishing an area number of 1, or it can be defined arbitrarily.

[AC6605-wlan-ap-r] ap id 1 adds the first AP

[AC6605-wlan-ap-1] region-id 1 to join area 1

Configure wmm templates

[AC6605-wlan-view] wmm-profile id 1 name wmm configuration wmm template name is wmm

[AC6605-wlan-view] radio-profile id 1 name radio configuration RF template name is radio

[AC6605-wlan-view] security-profile id 1 name secu configuration security template name is secu

Security-policy wep

Wep authentication-method share-key calls the password in the security template, this is optional.

Wep key wep-40 pass-phrase 0 cipher xxxxx

[AC6605-wlan-view] traffic-profile id 1 name tarff configuration traffic template name is tarff

[AC6605-wlan-view] radio-profile id 1 enters RF template

[AC6605-wlan-radio-prof-radio] wmm-profile id 1

Create a service set

[AC6605] int Wlan-Ess 1

[AC6605-Wlan-Ess1] port hybrid pvid vlan 101

[AC6605-Wlan-Ess1] port hybrid untagged vlan 101

[AC6605] wlan

[AC6605-wlan-view] service-set id 1 name s01

[AC6605-wlan-service-set-s01] wlan-ess 1

[AC6605-wlan-service-set-s01] traffic-profile id 1

[AC6605-wlan-service-set-s01] security-profile id 1

[AC6605-wlan-service-set-s01] ssid huawei

[AC6605-wlan-service-set-s01] service-vlan 101

Establish a virtual ap

[AC6605-wlan-view] ap 1 radio 0 radio 0 means operating frequency 2.4GH if it is radio 1 operating frequency is 5GH

[AC6605-wlan-radio-1/0] radio-profile id 1 service set is pushed to AP

[AC6605-wlan-radio-1/0] service-set id 1 binds RF template

[AC6605-wlan-view] commit ap 1 is issued to AP1, this command is essential

Optional: do not have mutual access to ping in the same IP address range

[AC6605-wlan-view] service-set id 1 1 represents the number of an AP.

[AC6605-wlan-service-set-s01] user-isolate refuses to exchange visits

[AC6605-wlan-view] finally, commit ap 1 must remember to apply to AP before it can take effect.