Some experience of using USB disk to start and install operating system

This article only explains the key steps.

Installation steps: take "U start" as an example

1. Make USB flash drive startup tool

two。 Copy gho to the GHO folder

3. Start the U disk, select the appropriate option, enter the restore partition interface, and restore GHO to disk C.

4. After the copy is complete, shut down the computer, remove the USB drive (this is important, otherwise it will fail), start the computer again, and the installation process may restart many times.

Launch the tool:

First recommendation: U startup, I used this to install successfully

Http://www.uqidong.com/

Second recommendation: general PE tool

Http://www.tongyongpe.com/

Third recommendation:

Ultraiso

Some knowledge:

BOIS setting. Sometimes you need to set the hard disk IDE option.

ISO:

Installing image files is the same process as installing with CD

XP does not support USB disk startup installation, the installation will prompt "inf file txtsetup.sif is corrupt or missing,ststus18 setup connot continure".

GHO

Simply copy the file to disk C, and then start it, and automatically restart it many times during the installation process. C

It is recommended to format disk C before copying files.

Any system can be started with a flash drive