H3C simulator ping,tel,ssh configuration
This week, you learned some basic configuration of H3C, such as ping,telnet,ssh configuration. Here are the specific configuration methods.
(PS: you need to add a network card to the device management of the physical machine, and change the network card connected to the host in the simulator to the secondary network card. The physical machine configuration IP is set on the secondary network card)
This configuration requires a router and a host topology diagram as follows
H3C simulator ping,tel,ssh configuration
One, ping configuration
(1) enter the interface and configure the interface ip and gateway
H3C simulator ping,tel,ssh configuration
(2) configure native IP address and verify
H3C simulator ping,tel,ssh configuration
Second, Telnet configuration
(1) enable the Telnet feature, enter the API to configure IP, enter the vty interface, and set the authentication method, login password and user level.
H3C simulator ping,tel,ssh configuration
(2) verify Telnet
H3C simulator ping,tel,ssh configuration
Third, ssh configuration
(1) generate RSA key, enter the API to configure IP, enable the ssh function, enter the vty interface to configure the user login interface, and configure the ssh login user and password
H3C simulator ping,tel,ssh configuration
(2) enable PuTTY client verification
H3C simulator ping,tel,ssh configuration
Fourth, summary
Generally speaking, the three configurations are quite simple, and there are no special problems that are difficult to deal with in the process of configuration.
