How to install net-tools and configure the network in CentOS
Today, I will talk to you about how to install net-tools and configure the network in CentOS. Many people may not know much about it. In order to make you understand better, the editor has summarized the following for you. I hope you can get something according to this article.
After minimizing the installation of CentOS, network commands such as ifconfig cannot be used, so you need to install the net-tools package.
View the package where ifconfig is located
Enter a command
Yum provides ifconfig
Check the package where ifconfig is located.
Install the net-tools package
Yum install net-tools
Configure the network
View network configuration through ifconfig-a
Configure the network according to the name of the network card:
Vim / etc/sysconfig/network-scripts/ifcfg-xxx (where xxx is the name of the network card)
DEVICE=xxx # network card device name. Eth0 represents the first network card HWADDR=00:0C:29:FC:8D:E6 # MAC address TYPE=Ethernet # network type Here is the Ethernet UUID=*** # unique identifier ONBOOT=yes # whether the current network card is effective with the network service, whether NM_CONTROLLED=yes # can be hosted by Network Manager graphical management tools, whether BOOTPROTO=static # automatically obtains IP (none, static, Whether dhcpIPADDR=11.10.1.192NETMASK=255.255.255.0GATEWAY=10.8.8.1DNS1=114.114.114.114DNS2=8.8.8.8IPV6INIT=no # IPv6 enables USERCTL=no # whether non-root users are allowed to control this network card to read the above content Do you know more about how to install net-tools and configure the network in CentOS? If you want to know more knowledge or related content, please follow the industry information channel, thank you for your support.