How to make a raspberry pie home music player
In this issue, the editor will bring you about how to make a raspberry pie home music player. The article is rich in content and analyzes and narrates it from a professional point of view. I hope you can get something after reading this article.
Music system download path link: http://pan.baidu.com/s/1o7QURu6 password: 6hw8
There are 3.0 and 3.1 versions in the network disk. I use 3.0 version, and 3.1 version is not much different.
This kit (without raspberry pie) includes: two-channel headphone cable, 8 Ω 2W horn, PAM8302A audio amplifier module
The wiring diagram is as follows:
After the wiring is complete, the raspberry pie can play the sound on any system.
But with the support of MoOde Audio system for raspberry pie.
We can build a home music player. DLNA devices that support NetEase Yun Music and KuGou Music
Preparation before installing MoodeAuido system
1. Raspberry pie 3 motherboard
2. A good quality micro usb interface cell phone power supply (with wire)
3. One TF card
4. Read and write a card
5. MoodeAudio image file and card writing program give a link to Baidu disk. Downloading from the external network is relatively slow.
Link: http://pan.baidu.com/s/1o7QURu6 password: there are versions 3.0 and 3.1 in 6hw8. This tutorial uses version 3.0. there is little difference between version 3.1.
= =
II. Installation of MoodeAudio system
1. Tf is inserted into the card writer and the card writer is inserted into the computer
2. Decompress moode-sdimg-r30.zip file to get moode-sdimg-r30.img image file. 3. Install the Win32DiskImager-0.9.5-install.exe program, find the Win32DiskImager program and start it, set the Write write point according to the figure below, and so on pop up the write completion prompt box.
5. Click Newwork to set up wifi, enter your wifi hotspot name at SSID, enter wifi password at Password, and then click APPLY.
6. If the input is correct, the acquired ip address and signal strength will be displayed.
After completing the above steps, the basic setup of MoodeAudio is complete, and the music can be played.
.
This is how to make a raspberry pie home music player. If you happen to have similar doubts, please refer to the above analysis to understand. If you want to know more about it, you are welcome to follow the industry information channel.
