The method of Color filling in cad Graphics

This article is to share with you about the method of color filling in cad graphics. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

Cad graphics color filling method: first open the file to fill the color, and press H plus space shortcut key; then select the gradient option, and pick up the graphics that need to be filled with color; finally, click OK.

The method of color filling in cad graphics:

1. Find the CAD file on the desktop that needs to be filled with color, and double-click to open it.

2. Find and click the hatch pattern and shame discoloration command symbol in the drawing command, or press the H plus space shortcut key in the English state, the hatch pattern and shame discoloration dialog box will pop up.

3. In the pop-up hatch and gradient dialog box, select the gradient option, select the appropriate color in the color option, and select the appropriate fade contrast in the shading, and then add the symbol in front of the pick point in the boundary.

4. Click in the drawing that needs to be filled with color to pick it.

5, after picking the drawing, right-click OK, and the hatch and gradient dialog box will pop up again, at this time, just click OK in the lower left corner.

6. Finally, check the color you fill to see if the rendering is satisfactory.

Thank you for reading! This is the end of this article on "the method of color filling in cad graphics". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!