How to configure H3C _ ComwareV7_L2TP
How to configure H3C _ ComwareV7_L2TP, in view of this problem, this article introduces the corresponding analysis and solution in detail, hoping to help more partners who want to solve this problem to find a more simple and feasible method.
1. View device version
FW_1030] dis version
H3C Comware Software, Version 7.1.054, Ess 9308P05
Copyright (c) 2004-2015 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
two。 Configure L2TP
L2tp enable / / enable L2TP globally
L2tp-group 1 mode lns
Allow l2tp virtual-template 1
Undo tunnel authentication / / do not enable tunnel authentication
Ip pool l2tp 172.16.1.2 172.16.1.20 / / configure address
Interface Virtual-Template1 creates and configures required interfaces
Description L2TPSTRANSTATION: *
Ppp authentication-mode chap
Remote address pool l2tp references address pool L2TP
Ip address 172.16.1.1 255.255.255.0
3. Create user authentication user
Local-user h4c class network
Password cipher $Cobb 3 $JEjRhTnmTDenPv93IyRc9zUslsxOuQ==
Service-type ppp
Authorization-attribute user-role network-operator
4. Add the required interface to the domain
Security-zone name Untrust
Import interface GigabitEthernet1/0/0
Import interface Virtual-Template1
The answer to the question on how to configure H3C _ ComwareV7_L2TP is shared here. I hope the above content can be of some help to you. If you still have a lot of doubts to be solved, you can follow the industry information channel to learn more about it.
