Sangfor_NGAF Learning Notes 3

How to log in to the NGAF device console:

NGAF logs in through manage port, default address: 10.251.251.251 (cannot be deleted, cannot be changed, can be added)

Connect to the computer network port through the network cable, and configure any IP address except 251 of the 24-bit network segment with the IP address 10.251.251.0.

Enter https://10.251.251.251 in the browser to log in to the device. The default user name / password is: admin/admin

How to restore exit settings:

Use the upgrade client to load the upgrade package

Restore exit settings through the console interface

View the password without deleting the configuration

Through the way of the U disk, the U disk must be in FAT32 format. The text of a new reset-password.txt must be placed in the root directory of the U disk, inserted into the USB port of the device, and then restart the device. 5-10 minutes after unplugging the U disk, the TXT document inside will become the suffix name of log, and the current password will be available when opened.

How to use the pass-through function to quickly restore business

If the equipment is found to be interrupted after it is put on the shelf, the service can be quickly restored through the pass-through function, that is, the software BYPASS. When the cut-through function is turned on, the authentication system, firewall, content security and other modules of the device are invalid.

In system maintenance-> packet interception log and pass-through-> enable