SonicWALL Firewall restores factory settings Reset

Took one, Sonicwall pro 4060 will not be in use of the firewall, found that the password can not enter the system. Try to use the frequently used password login system, but to no avail. Finally, restore the factory settings.

The tool is relatively easy to use, with a paper clip that triggers the reset button behind the firewall for 5 to 10 seconds. Depending on the model of the firewall, the reset button is located next to the console port or the power supply. If the reset does not reflect, I restart the firewall and operate again.

Set the local IP address, which will connect with the firewall later.

Log in to the system, https://192.168.168.168

Back it up in case you want to use it in the future.

Click the boot button on the right side of Current Firmware with Factory Default Settings and the firewall will restore the factory settings.

During the restart process, wait

After a minute, enter the user name and admin,password password into the system, the recovery is complete, and the backup operation is completed.