How to set timing switch in NAS

It is believed that many inexperienced people don't know what to do about how to set the timing switch in NAS. Therefore, this paper summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem.

1. Log in to the TOS system

2.TOS Desktop-Control Panel-General Settings-hardware and Power supply

3. Select power supply

4. After checking "start Auto Boot", click apply (when there is an abnormal power outage (such as a power outage or power cord is unplugged), TNAS will power on automatically when the power is restored.

5. Extend the service life of TNAS and hard drive, and you can also enable the automatic switch program.

6. Click create, set the automatic switch time, and save

7. You can view the automatic switch schedule set up.

Note: an abnormal power outage may cause the boot plan to fail. If this happens, please turn it on manually.

After reading the above, have you mastered how to set the timing switch in NAS? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!