How to carry out the experiment of hsrp Hot standby routing Protocol

It is believed that many inexperienced people are at a loss about how to carry out the experiment of hsrp hot standby routing protocol. Therefore, this paper summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem.

Name of experiment: HSRP experiment

Purpose: to use and configure HSRP skillfully.

Experimental topology diagram:

Main configuration steps:

R1 configuration:

R1 (config) # inter e0Universe 0

R1 (config-if) # standby 100 ip 192.168.10.10

R1 (config-if) # standby 100 priority 110

R1 (config-if) # standby 100 preempt

R1 (config-if) # standby 100 track e0lap 1 20

R1 (config) # inter e0bin1

R1 (config-if) # standby 200 ip 192.168.20.20

R1 (config-if) # standby 200 preempt

R2 configuration:

R2 (config) # inter e0Universe 0

R2 (config-if) # standby 100 ip 192.168.10.10

R2 (config-if) # standby 100 preempt

R2 (config) # inter e0Compact 1

R2 (config-if) # standby 200 ip 192.168.20.20

R2 (config-if) # standby 200 priority 110

R2 (config-if) # standby 200 preempt

R2 (config-if) # standby 200 track e0lap 0 20

After reading the above, have you mastered the method of how to experiment with hsrp hot standby routing protocol? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!