VMware Virtual Machine installation Linux system Picture and text tutorial

This article shares the specific steps of installing Linux system in VMware for your reference. The details are as follows.

First of all, prepare a Linux image file, which I use here is the CentOS-6.6-x86_64-minimal version.

Second, you need to install VMware software on your computer. This step is omitted (stupid installation).

The installation steps are as follows:

1. New Virtual Machine Wizard

two。 Select the operating system to install and its corresponding version

3. Name the virtual machine and set the location for placement

4. Specify disk capacity

5. Configure the relevant hardware of the Linux operating system

Click "Custom hardware" on the left, and the hardware configuration diagram on the right appears. In this interface, you can configure operating system memory, processors, image files, networks, printers, and so on. This step can be configured now or in the next step (see step 7). Click the close button when the configuration is complete.

6. Configure the image file of the operating system

7. When the configuration is complete, I will show you the VMware interface.

8. The next step is to start the virtual machine.

Select the virtual machine to start, click the start button in step 7, and the following figure appears in turn:

9. Whether to conduct Media test or not

Choose to skip here.

Enter the next interface

Continue next

10. Select the language displayed during installation

I choose English here.

11. Select keyboard input language

11.Storage Device Warning

Select "Yes,discard any data"

twelve。 Set hostname

13. Set operating system time zone information

Shanghai time zone is chosen here.

14. Set operating system login password

If the password setting is too simple, the system will prompt you as follows:

If it is used for local computer testing, it does not matter much, but if it is a production environment and other important cases, you need to set a complex password!

Click Use Anyway to skip

15. Select installation type

Choose Use All Space here

16. Write the above configuration to disk

17. Installing

18. Interface with completed installation

19. Click the Reboot button in step 18-restart the operating system

20. Complete the installation

At this point, you can log in to the operating system, the user name defaults to root, and the password is the password set in step 14 above.

The above is the whole content of this article, I hope it will be helpful to your study, and I also hope that you will support it.