What are the ways for netapp to check the serial number
This article will explain in detail the methods of checking serial numbers on netapp. The editor thinks it is very practical, so I share it for you as a reference. I hope you can get something after reading this article.
Method for netapp to view serial numbers _ linux command on the storage server
Run-node * sysconfig
Each node corresponds to a serial number, and two machines in a set of machine heads are two nodes (ascpbk-01\ ascpbk-02)
Ascpbk:: > run-node * sysconfig
2 entries were acted on.
Node: ascpbk-01
NetApp Release 8.3.2P2: Mon May 23 02:28:11 PDT 2016
System ID: 0537013390 (ascpbk-01); partner ID: 0537013402 (ascpbk-02)
System Serial Number: 451647000085 (ascpbk-01)
System Rev: E2
System Storage Configuration: Multi-Path HA
System ACP Connectivity: NA
All-Flash Optimized: false
Backplane Part Number: 111-01105
Backplane Rev: C2
Backplane Serial Number: 021640023867
Slot 0: System Board
Model Name: FAS8020
Processors: 6
Processor type: Intel (R) Xeon (R) CPU E5-2620 @ 2.00GHz
Memory Size: 24576 MB
Memory Attributes: Bank Interleaving
Hoisting
Channel Interleaving
Chipkill ECC
Controller: A
Service Processor Status: Online
Slot 0: Internal 10/100/1000 Ethernet Switch
Firmware Version: Version2 SB_XX Switch0
Locked-wrench: auto-10tx-hd-down
Wrench: auto-1000t-fd-up
Device Type: 88E6176
Slot 0: Internal 10/100/1000 Ethernet Controller
E0M MAC Address: 00:a0:98:aa:a1:85 (auto-1000t-fd-up)
E0P MAC Address: 00:a0:98:aa:a1:86 (auto-100tx-fd-down)
Slot 0: 10 Gigabit Ethernet Controller IX1-SFP+
E0a MAC Address: 00:a0:98:aa:a1:7b (auto-10g_sr-fd-up)
E0b MAC Address: 00:a0:98:aa:a1:7c (auto-10g_sr-fd-up)
Slot 0: Dual Gigabit Ethernet Controller 82580
E0e MAC Address: 00:a0:98:aa:a1:83 (auto-1000t-fd-up)
E0f MAC Address: 00:a0:98:aa:a1:84 (auto-unknown-down)
Slot 0: NVRAM (NVRAM 9)
Revision: C0
Serial Number: 021637019696
DIMM Size: 4096 MB
Running Firmware: 1.3.0
Slot 0: SAS Host Adapter 0a
24 Disks: 22850.1GB
1 shelf with IOM6
Slot 0: SAS Host Adapter 0b
24 Disks: 22850.1GB
1 shelf with IOM6
Slot 0: Fibre Channel Target Host Adapter 0c
Slot 0: Fibre Channel Target Host Adapter 0d
Slot 0: IB Host Adapter i0 (Mellanox ConnectX MT27518 rev. 0)
Interconnect Port 1:
Default GID: fe80:0000:0000:0000:00a0:9800:0034:ab04
Interconnect Port 2:
Default GID: fe80:0000:0000:0000:00a0:9800:0034:ab05
Slot 0: Intel USB EHCI Adapter u0a (0x45b20000)
Boot0 Micron Technology 0x655, class 0Univer 0, rev 2.00Universe 11.16, addr 2 7744MB 512B/sect (15F0082700132764)
Node: ascpbk-02
NetApp Release 8.3.2P2: Mon May 23 02:28:11 PDT 2016
System ID: 0537013402 (ascpbk-02); partner ID: 0537013390 (ascpbk-01)
System Serial Number: 451647000084 (ascpbk-02)
System Rev: E2
System Storage Configuration: Multi-Path HA
System ACP Connectivity: NA
All-Flash Optimized: false
Backplane Part Number: 111-01105
Backplane Rev: C2
Backplane Serial Number: 021640023867
Slot 0: System Board
Model Name: FAS8020
Processors: 6
Processor type: Intel (R) Xeon (R) CPU E5-2620 @ 2.00GHz
Memory Size: 24576 MB
Memory Attributes: Bank Interleaving
Hoisting
Channel Interleaving
Chipkill ECC
Controller: B
Service Processor Status: Online
Slot 0: Internal 10/100/1000 Ethernet Switch
Firmware Version: Version2 SB_XX Switch0
Locked-wrench: auto-10tx-hd-down
Wrench: auto-1000t-fd-up
Device Type: 88E6176
Slot 0: Internal 10/100/1000 Ethernet Controller
E0M MAC Address: 00:a0:98:aa:a2:45 (auto-1000t-fd-up)
E0P MAC Address: 00:a0:98:aa:a2:46 (auto-100tx-fd-down)
Slot 0: 10 Gigabit Ethernet Controller IX1-SFP+
E0a MAC Address: 00:a0:98:aa:a2:3b (auto-10g_sr-fd-up)
E0b MAC Address: 00:a0:98:aa:a2:3c (auto-10g_sr-fd-up)
Slot 0: Dual Gigabit Ethernet Controller 82580
E0e MAC Address: 00:a0:98:aa:a2:43 (auto-1000t-fd-up)
E0f MAC Address: 00:a0:98:aa:a2:44 (auto-unknown-down)
Slot 0: NVRAM (NVRAM 9)
Revision: C0
Serial Number: 021637019915
DIMM Size: 4096 MB
Running Firmware: 1.3.0
Slot 0: SAS Host Adapter 0a
24 Disks: 22850.1GB
1 shelf with IOM6
Slot 0: SAS Host Adapter 0b
24 Disks: 22850.1GB
1 shelf with IOM6
Slot 0: Fibre Channel Target Host Adapter 0c
Slot 0: Fibre Channel Target Host Adapter 0d
Slot 0: IB Host Adapter i0 (Mellanox ConnectX MT27518 rev. 0)
Interconnect Port 1:
Default GID: fe80:0000:0000:0000:00a0:9800:0034:ab34
Interconnect Port 2:
Default GID: fe80:0000:0000:0000:00a0:9800:0034:ab35
Slot 0: Intel USB EHCI Adapter u0a (0x45b20000)
Boot0 Micron Technology 0x655, class 0Univer 0, rev 2.00Universe 11.16, addr 2 7744MB 512B/sect (0FF0082700685336)
Ascpbk:: >
Netapp method for viewing serial numbers _ web interface of the storage server
This is the end of this article on "what are the ways for netapp to check serial numbers?". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, please share it out for more people to see.
