How to set up the same network card to use multiple IP addresses in win10 system
This article mainly introduces how to set up the same network card in the win10 system to use multiple IP addresses, the article is very detailed, has a certain reference value, interested friends must read it!
The network card is displayed in the computer as a local connection or Ethernet, usually the IP address is obtained automatically, or the user specifies one for it, then some specific circumstances may need to use two different IP addresses, so how to set it? the following editor and you share the same network card using multiple IP address settings, friends in need come and have a look!
The setup steps are as follows:
1. Right-click the network icon in the lower right corner of the desktop and select "Open Network and Internet Settings":
two。 Select change Adapter options:
3. Right-click the currently used network card and select Properties:
4. Double-click Internet Protocol version 4 (TCP/IPv4):
5. Fill in the original IP and other information:
6. Then click the "Advanced" button below, and click "add" above in the Advanced options:
7. Enter another IP to save. Of course, the IP address you set needs to be within the same network segment.
The function of setting multiple IP on one Nic:
The function of setting multiple IP in a network card is to connect multiple network segments.
For example:
There are two Lans, LAN1 (192.168.0.0), LAN2 (192.168.1.0), and LAN1 and LAN2 are physically connected through a switch. Because the network number of LAN1 is 192.168.0 and the network number of LAN2 is 192.168.1, the host under LAN1 and the host under LAN2 cannot communicate. How can we get them to communicate with each other? There are two ways.
[method 1] connect LAN1 and LAN2 through a router.
[method 2] the host under LAN1 or LAN2 is set with two IP addresses, one is the host address of the LAN1 network number, and the other is the host address of the LAN2 network number. For example: 192.168.0.100 Universe 24 and 192.168.1.100 Universe 24.
The above is all the contents of the article "how to set up the same network card to use multiple IP addresses in the win10 system". Thank you for reading! Hope to share the content to help you, more related knowledge, welcome to follow the industry information channel!
