How to change the RAID level of a virtual disk

How do I change the RAID level of a virtual disk? I believe that most people have not yet learned this skill, in order to let you learn, to give you a summary of the following content, do not say much, let's move on.

Start the experiment, log in through irac9 to check the storage configuration, check that the virtual disk is raid0, and now you need to change it to raid1. After inserting the hard disk, identify the new hard disk in the physical disk configuration on the page, and then select the raid level migration in the virtual disk operation in the virtual disk.

After confirmation, you can migrate to raid1 online, and the system does not need downmachine.

If you need to do other raid-level migration, please refer to the dell documentation, such as switching from raid1 to raid0 without using the downlink machine, and the capacity has been expanded. All the above have been tested to be normal in practice.

If the array card fails, after replacing the entire array of cards, restart the machine and import the external configuration in the controller configuration to be used normally.

Special note: if the installation system is on a non-raid disk, the raid conversion cannot be performed and the system needs to be reinstalled.

After reading the above, have you mastered the method of changing the RAID level of the virtual disk? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!