How to make Flash Boot disk in windows system

In this issue, the editor will bring you about how to make a flash drive in the windows system. The article is rich in content and analyzes and narrates it from a professional point of view. I hope you can get something after reading this article.

When the computer cannot be started, the boot disk is the last straw for the computer to "come back to life". Now that flash memory has entered thousands of households, you might as well make a flash boot disk, which is easy and convenient.

The idea of making a flash boot disk is to first brush the WinPE into the flash memory, and then let the WinPE of the graphical interface start the computer.

WinPE (Windows Preinstallation Environment) is a 32-bit system with few (but very core) services that can be used to create a graphical interface shell (ShellEx) to boot the computer on media such as a CD (see figure).

Step 1: download WinPE

There are many WinPE versions made by computer experts on the Internet. Here we recommend the "Deep Mountain Red Leaf Pocket PE CD Toolbox". The boot disk is based on Windows XP and integrates many system maintenance and repair tools. The downloaded format is ISO CD image.

Step 2: write WinPE to flash memory

Writing WinPE to flash memory requires the use of UltraISO software, which you can access and download.

Here are the specific ways to write WinPE to flash memory: first, click the "Open" button on the UltraISO toolbar, select the WinPE image file you downloaded, and then select "start → to write to the hard disk image". In the "image file", UltraISO has automatically filled in the path of the WinPE image file. Remind everyone to insert the flash memory, when UltraISO detects the flash memory, the "write mode" in the dialog box will become optional, it is recommended to choose "USB-HDD+" or "USB-ZIP+" mode, the compatibility of these two modes is better; then click "OK", the UltraISO pop-up dialog box indicates that the data on the flash memory will be lost, click "Yes" to continue.

Step 3: check and verify

When the write is complete, unplug the flash memory, close the UltraISO, and then insert the flash memory again, adding a USB disk to the "disk drive" of the device Manager (Control Panel → system → hardware). It's done, and all that's left is to set the priority startup device to "USB" in BIOS.

This is how to make a flash boot disk in the windows system shared by the editor. If you happen to have similar doubts, you might as well refer to the above analysis to understand. If you want to know more about it, you are welcome to follow the industry information channel.