Use the fdformat command in linux to low-level format the specified floppy drive device

This article mainly introduces the use of linux fdformat command on the designated floppy drive device for low-level format, the article is very detailed, has a certain reference value, interested friends must read it!

The fdformat command is used for low-level formatting of the specified floppy drive device.

When using this instruction to format a floppy disk, it is best to specify devices such as the following:

/ dev/fd0d360 drive A:, disk is 360KB disk / dev/fd0h2440 drive A:, disk is 1.4MB disk / dev/fd1h2200 drive B:, disk is 1.2MB disk

If you use a device such as / dev/fd0, if the disk inside is not standard capacity, the formatting may fail. In this case, the user can use the setfdprm instruction to specify the necessary parameters first.

Syntax format: fdformat [parameters]

Common parameters:

-n turn off the confirmation function. This option turns off the confirmation step after formatting

Reference example

Format the disk of drive An into the disk of 1.4MB, and omit the steps of confirmation:

[root@linuxcool ~] # fdformat-n / dev/fd0h2440 above is all the content of low-level formatting for the specified floppy drive device using the fdformat command in linux. Thank you for reading! Hope to share the content to help you, more related knowledge, welcome to follow the industry information channel!