Shulou(Shulou.com)06/02 Report--

The steps of the experiment:

Configure VLAN-10 20 30 40 50 60 for R1 R2 SW1 SW2

Configure the access link on the gi 1-2-3 interface on SW1 and join the corresponding VLAN

Configure IP for VLAN 20

Configure the corresponding IP, gateway on the gi 01 interface on R1

Connect directly to R1 using the RIP,10 20 30 100 network segment

(write all the RIP in before, just in case.)

After completing this step, PC1 interconnects with PC2 and R2gi 1; / /

Configure the interface IP- gateway for gi 0 gi 2 on R2

Use RIP,30 40 50 60 100

Configure IP for VLAN 3040 on SW2

Interface gi 1 4522 configures access links and joins the corresponding VLAN

Use RIP,30 40 50 60 100

(write all the RIP in before, just in case.)

Just in case; VLAN that is not a gateway on SW1,SW2 is also configured with IP

After this step, the whole network is interconnected.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.