Lync Server 2013 Standard Edition deployment (5) Front-end server installation
After the Lync Server 2013 front-end topology definition is complete and successfully released.
1. Open the start menu and select the Lync Server deployment Wizard
two。 Choose to install or update the Lync Server system
3. Run step 1: install the local configuration store and select complete
4. Run step 2: install or remove Lync Server components
5. Next step
6. Complete
7. Select step 3: request, install, or assign a certificate
8. Select the default certificate and select the request
9. Next step
10. Choose to send the request to the online certification authority immediately, next
11. Next step
twelve。 Next step
13. Next step
14. Enter the certificate friendly name, check to mark the private key of the certificate as exportable, and next
15. Enter the name and unit of the organization, next
16. Enter international and city, next step
17. Next step
18. Check SIP domain, next step
19. Next step
20. Next step
21. Next step
twenty-two。 Complete
23. Next step
24. Next step
25. Complete
twenty-six。 Select OAuthTokenIssuer and select request
twenty-seven。 Next step
twenty-eight。 Choose to send the request to the online certification authority immediately, next
twenty-nine。 Next step
thirty。 Next step
thirty-one。 Next step
thirty-two。 Enter a friendly name, next
thirty-three。 Next step
thirty-four。 Next step
thirty-five。 Next step
thirty-six。 Next step
thirty-seven。 Next step
thirty-eight。 Next step
thirty-nine。 Complete
forty。 Next step
forty-one。 Next step
forty-two。 Complete
forty-three。 Certificate request completed, closed
forty-four。 Open the start menu and select the Lync Server Management Shell
forty-five。 Enter start-cswindowsservice
Wait for the service to start, and the front-end server has been installed.
