HP-UX modifies the SNMP community word of MP card

HP-UX system MP login

MP login: Admin

MP password: *

Hewlett-Packard Integrity Integrated Lights-Out 2

(C) Copyright Hewlett-Packard Company 1999-2008. All Rights Reserved.

MP Host Name: sv20

Revision F.02.23

*

MP ACCESS IS NOT SECURE

Default MP users are currently configured and remote access is enabled.

Modify default users' passwords or delete default users (see UC command)

OR

Disable all types of remote access (see SA command)

*

MP MAIN MENU:

CO: Console

VFP: Virtual Front Panel

CM: Command Menu

SMCLP: Server Management Command Line Protocol

CL: Console Log

SL: Show Event Logs

HE: Main Help Menu

X: Exit Connection

Go to CM to view the help [sv20] MP > cm

[sv20] MP:CM >?

MP:HE > list

List

= MP Help: Command Menu List =

BP: Reset BMC Passwords PC: Remote Power Control

CA: Configure asynch/serial ports PM: Remote Power Mode Control

DATE: Display Date PR: Power Restore Policy Config.

DC: Default Configuration PS: Power management module Status

DF: Display FRU Information RB: Reset BMC

DI: DIsconnect users RS: Reset System through RST signal

DNS: Configure DHCP and DNS SA: Set MP Access

FW: Upgrade MP firmware SNMP: Configure SNMP parameters

HE: Display Help SO: Security Options

ID: System Information SS: System processors Status

IT: Modify MP inactivity timeouts SYSREV: Display System firmware Revs.

LC: Configure LAN, SSH and Web ports TC: Reset system via INIT

LDAP: Configure Directory parameters TE: TEll- send a msg. To other users

LM: License Management UC: User Configuration

LOC: Locator LED display WHO: Display connected MP users

LS: LAN Status XD: Diagnostics and reset of MP

=

(HE for main help, enter command name, or Q to quit)

MP:HE >

[sv20] MP > CM

Enter [sv20] MP:CM > SNMP in the snmp configuration information

Current SNMP Configuration Settings:

N-SNMP Status: Enabled

C-Community String: public

T-SNMP Alerts: Disabled

1-SNMP Alert Destination 1:

2-SNMP Alert Destination 2:

3-SNMP Alert Destination 3:

4-SNMP Alert Destination 4:

Select C to modify the group words Enter parameter (s) to change, A to modify All, or [Q] to Quit: C

For each parameter, enter:

New value, or

To retain the current value, or

DEFAULT to set the default value, or

Q to Quit

Community String:

Current-> public (default)

Any name of alpha numeric from 1 to 20 characters

Enter new value, or Q to Quit: SDm0bile

Enter Parameter (s) to revise, Y to confirm, or [Q] to Quit: y

Modification completed