The way of window10 Encapsulation

To meet the needs of the company's business, encapsulate win10 to play.

The first stage of system encapsulation using EasySysprep_4.5

1. Install the original win10; in workstation and install all the required software such as input method, QQ, Wechat, etc.

two。 Copy the encapsulation tools (Win100000 driver-EasyDrv7_win10.x64.iso and encapsulation software EasySysprep downloaded by IT Sky) to the virtual machine D disk in advance.

3. After copying all the tools to the virtual machine, remove the virtual machine network card for compatibility

4. Open Easysysprep to start encapsulation, as shown below

Second, the second stage of system encapsulation using EasySysprep_4.5

1. The virtual machine hangs the PE image and enters the PE system

two。 After entering PE, open EasySysprep_4.5 again, uncheck the OEM picture and set the home page.

3. First create a tools folder under disk C, and then put the Win100, 000 driver into it, and uncheck the integrated runtime

4. Save the configuration file and exit the program.

5. After packaging, back up the system in PE and make GHO files.

Second, everything is ready, as a result, the first time to run ES reported an error, as shown in the following figure, it took 2 days to finally get it done. The solution is as follows:

1. Check the bottom of the Microsoft win10 App Store before installing the system software and downloading the patch pack by running the powershell command by the administrator

Get-AppXPackage | Remove-AppxPackage and Get-AppxPackage-AllUsers | Remove-AppxPackage

two。 Then enable the network installation software and download the system patch

3. Remove the network card of the virtual machine before running the encapsulation.