Detailed installation steps for VMware vSphere 6.7

This article mainly explains "Detailed installation steps of VMware vSphere 6.7". The explanation in this article is simple and clear, easy to learn and understand. Please follow the ideas of Xiaobian slowly and deeply to study and learn "Detailed installation steps of VMware vSphere 6.7" together!

Environment: VMware VCSA 6.7 (VMware-VCSA-all-6.7.0-8169922.iso)

Step 1: Select Boot from vSphere 6.7 Installation Disk:

Step 2: Start loading vSphere 6.7 boot disk

Step 3: Load system information and verify hardware drivers

(If this process fails at any stage, you need to consider whether the corresponding driver is missing in the iso file of vSphere 6.7)

Step 4: Enter to begin the vSphere 6.7 installation process

Step 5: F11 Accepts User Agreement

(I forgot to cut off the screenshot interface, so I added it later)

Step 6: Select the appropriate vSphere 6.7 installation location

(If you can't scan any installation locations here, you may need to consider whether the vSphere 6.7 installation disk is missing a corresponding drive)

Step 7: Select the keyboard mode during installation

Step 8: Set root administration and login passwords for vSphere 6.7

(Note: vSphere 6.7 no longer supports simple passwords!)

Step 9: F11 Start installing vSphere 6.7

Step 10: Installation is complete, eject the corresponding installation boot disk and restart the host

Step 11: After the restart, the system interface is as follows

Step 12: F2 Enter the system settings interface

Step 13: You can modify and configure the system as follows:

(Select Configure Management Network to manage network configuration)

Step 14: You can choose to modify the management network card, VLAN, IPv4, IPv6, DNS, DNS domain

Step 15: After configuration is complete, save the configuration, and the system will restart again.

Step 16: The system restarts.

Step 17: Once the reboot is complete, log in to vSphere 6.7 via your browser

(Note: Starting with VMware 6.5, VMware vSphere ESXI removes Client login access and is only accessible through the browser)

VMware vSphere 6.7 installation is complete as of the above

Thank you for reading, the above is the "VMware vSphere 6.7 detailed installation steps" content, after learning this article, I believe you have a deeper understanding of the detailed installation steps of VMware vSphere 6.7, the specific use needs to be verified. Here is, Xiaobian will push more articles related to knowledge points for everyone, welcome to pay attention!