The method of creating ADSL Dial-up access by Linux

This article mainly explains "the method of Linux creating ADSL dial-up Internet access". Interested friends may wish to have a look. The method introduced in this paper is simple, fast and practical. Let's let the editor take you to learn "Linux's method of creating ADSL dial-up access".

Before using linux to create an adsl dial-up connection. We need to check to see if our computer itself has a rpm package installed with pppoe.

If you use the above command, the package name of rp-pppoe-3.5-32. 1 is not displayed. That requires us to install it manually. If your linux version is above AS 4. The software package can be found on the first CD. You can use the command:

Rpm-ivh rp-pppoe-3.5-32.1.i386.rpm Let's install them.

It's installed. We execute the adsl-setup command to enable the configuration wizard. In the following prompt wizard. Follow the prompts to enter the required information.

The first step is to enter our ADSL name, which I enter here is: adsl_test

In the second step, we need to configure the name of the network card to which ADSL needs to connect: eth2

In the third step, we need to configure the dial type. If it is a monthly user can be set to be online all the time. You can change the type you need according to your actual situation: No

The fourth step is to set our DNS address if you know our DNS address. You can enter the address you know. If you don't know that you can enter "Server" here, it means that when we dial successfully, we will automatically get the IP address from ISP:

Step 5 enter our ADSL password:

The sixth step requires us to choose whether to allow ordinary users to connect and disconnect ADSL. Here we choose NO.

The seventh step is to choose the type of firewall. We can customize the firewall rules through iptables, which is troublesome. So we enter "0" here and do not start the firewall.

The eighth step requires us to configure whether to start the ADSL dial-up connection when the system starts up, because for debugging, I choose NO. There is no need to connect at startup

Step 9, make sure to save the settings, and the configuration interface will output the information we just configured. If the configuration is correct, you can enter "y" and the configuration wizard will automatically generate the configuration file

At this point, I believe you have a deeper understanding of "Linux's method of creating ADSL dial-up Internet access". You might as well do it in practice. Here is the website, more related content can enter the relevant channels to inquire, follow us, continue to learn!