Shulou(Shulou.com)06/03 Report--

Windows 2012 port aggregation and cisco Ethernet channel

1. Open the server manager, select the local server, and you can see that NIC Teaming is disabled. Click Disable to enable the function.

two。 Select the new group in the group task, or select the appropriate network card in the available network card on the right, and then right-click to join the new group.

3. After setting the name for the group and selecting the mode, the NIC Teaming can be successfully established. At the same time, if the mode selection switch is independent, then the aggregation time will be slightly longer and you will need to wait patiently.

4. Switch Ethernet channel configuration

Interface Port-channel4

Switchport access vlan 32

Switchport mode access

5. Add the port to the Ethernet channel

Interface GigabitEthernet1/0/16

Switchport access vlan 32

Switchport mode access

Channel-group 4 mode on

!

Interface GigabitEthernet1/0/17

Switchport access vlan 32

Switchport mode access

Channel-group 4 mode on

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.