MDT2013 client deployment error
Recently, the MDT2013 system has been deployed according to the blog post "MDT2013 from beginner to proficient Conceptual Literacy" by blogger wenzhongxiang. As shown below:
After the installation is completed, deploy the Window7 system on the client PC1. After PC1 obtains the IP address and presses F12, the following error occurs:.
After troubleshooting, it is found that the system can be deployed normally if the PC1 is connected to the core switch 5560. Prove that there is no problem with the MDT2013 installation. After investigation, it was found that the port aggregation was done directly by core switch 5560 and access switch 3100, and one port did not start normally. When the port aggregation starts normally, the PC at 3100 can also deploy the system normally.
