About the problem that the dual network card SFTP transmission can not connect to the server.
You can set the priority of the network card as follows. Set the No.1 network card connected to the A network to the No.2 network card of the 1Magi B network and set it to 2. The interface is as follows:
No. 1 network card setting
No. 2 network card setting
Or by deleting or adding a permanent routing table
Route print prints the routing table to see if there are permanent routes
If a permanent route for 192.x.x.x or 192.168.x.x is found, delete it with the following command
Route delete 192.168.0.0 mask 255.255.0.0 192.168.1.1
Or save the command for bat processing
Route delete *
Route add 192.168.1.0 mask 255.0.0.0 192.168.1.1 metric 1-p
Route add 0.0.0.0 mask 0.0.0.0 192.168.1.5 metric 2-p
Route add 172.24.0.0 mask 255.0.0.0 172.24.24.1 metric 2-p
Ipconfig / release
Ipconfig / renew
