HP C7000 Blade Server play 1: blade address configuration

1. Go to the computer room to see the blade server, open the LED display in front of the cabinet, and set the OA management board to initialize the IP address.

two。 After setting the IP address, connect the OA management board and the computer through the network cable, and configure the computer and the management board in the same network segment, so that the computer can access the address of the management board. Open the management page of the blade server through the web page

3. Set the management address, mask, and gateway address for each blade

4. After setting the address, you can log in to the blade management page through the blade management address

5. Open the remote console interface of the blade server

6. The remote console for java appears, click accept, and click run

7. Click to continue

8. The remote console interface for the blade appears. You can then configure RAID and install OS on the blades.