The final solution that the Win10 system cannot start

The computer error caused the system to fail to start. Share the final solution that the Win10 system cannot start.

The steps are as follows:

1. First of all, you need to prepare a Windows10 installation disk, just write the original Windows10 Microsoft image to the U disk. Of course, if you don't have a pre-prepared installation disk, you need to find another computer to make it.

2. When booting from USB disk, the interface shown in the following figure appears:

3. Press the Shift+F10 shortcut key to bring up the command prompt. For notebooks, you may need to press Shift+Fn+F10.

4. You can enter the notepad.exe repair command directly from the command prompt, but because the drive letter of the hard disk partition under PE may be different, we also need to determine which partition Windows is installed in. Determine the method:

5. Click the file in notepad to open, as shown in the following figure, and click "this computer (or computer, this computer) on the left side of the" Open "dialog box.)"

6. Write down two drive letters, one is the boot partition drive letter, which is reserved for the system, the drive letter is C, and the other is the partition where Windows is installed, where the drive letter is D. Then close notepad, enter the command enter 01sfc / scannow / offbootdir=C:\ / offwindir=D:\ Windows at the command prompt to start "one-click repair", and pay attention to modify the drive letter in the command according to the actual situation.