Router management
1. WAN port address
A, WAN port [Internet port] to connect to the external network (light cat)
B. The IP address of the WAN port is the address of the Internet.
2. The LAN port address is set manually.
A, LAN port [local port] connects to the internal network (host or switch), and each LAN port can connect to a host.
B. Each LAN port can assign an IP address to the host. (note: the IP address of LAN port cannot be duplicated, otherwise it will cause address conflict)
Third, how to reset the router
Switch reset:
With the power on, press and hold the reset button [RESET] for about 10 seconds (the reset key is in a small hole and can only be pressed with toothpicks, needles, pen tips, etc.)
IV. Router configuration Wizard
