What to do about the failure of HP SD2 DAT160 small tape drive?

What to do about the failure of HP SD2 DAT160 small tape drive? in view of this problem, this article introduces the corresponding analysis and solution in detail, hoping to help more partners who want to solve this problem to find a more simple and feasible way.

# dmesg

USB frame sequencing 0x276155b4 to 0x27613839

USB frame sequencing 0x2764d58d to 0x2764b813

CISS: RAID SA controller on hardware path 41/0/1/2/0/0/0 has detected the removal

Of non-disk-device:

Connector:??

Enclosure: 0

Bay: 5

[PROD root@#] ioscan-fnH 41qq0x1xxxxxxxxxxxxxxxxxxxxxx

Class I H/W Path Driver S/W State H/W Type Description

=

Ext_bus 0 41/0/1/2/0/0/0 ciss CLAIMED INTERFACE PCIe SAS SmartArray P411 RAID Controller

/ dev/ciss0

Ext_bus 26 41/0/1/2/0/0/0.128.16 ciss_vbus NO_HW INTERFACE CISS virtual bus device interface

Target 16 41/0/1/2/0/0/0.128.16.4 tgt NO_HW DEVICE

Tape 2 41/0/1/2/0/0/0.128.16.4.0 stape NO_HW DEVICE HP DAT160

/ dev/rmt/2m / dev/rmt/2mn / dev/rmt/c26t4d0BEST / dev/rmt/c26t4d0BESTn

/ dev/rmt/2mb / dev/rmt/2mnb / dev/rmt/c26t4d0BESTb / dev/rmt/c26t4d0BESTnb

[PROD root@#] ioscan-m lun | grep-I no_hw

Tape 1 64000/0xfa00/0x9 estape NO_HW DEVICE online HP DAT160

This is the answer to the question about what to do with the failure of HP SD2 DAT160 small tape drive. I hope the above content can be of some help to you. If you still have a lot of doubts to be solved, you can follow the industry information channel for more related knowledge.