Shulou(Shulou.com)06/02 Report--

Experimental environment

1: GNS3 software

2: two initialized PCs (using VPCs) and three initialized routers

3: if the host is using a virtual machine, then all the firewalls of the virtual machine need to be turned off, otherwise the data transmission will be affected later.

Experimental process

1:GNS3 software to get two PC hosts and three routers ready.

2: we connect them all with a network cable, define each IP address / network number according to our personal preference, and write it next to the port, so that we can enter the IP address and check it.

3: run all the machines and record each IP address in the PC and router

Host set IP address command: ip (space) ip address (space) network card boycott

Router IP address command: enter the respective interface mode, enter ip (space) address (space) IP address (space) subnet mask

Note: after I demonstrated the operation in the static routing experiment, I won't say any more.

4: after the host and route are configured, we begin to configure the dynamic routing network number on the router

Then set the routing of R2 and R3 in the same way. After setting it up, you will see it under the query on R1.

You will find that your R2Magol R3 route also automatically generates the network number of other routes for you. This shows that our PC1 and PC2 can already communicate with each other.

Description:

Dynamic path is a language used to exchange information between routers, which reduces task management.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.