Dell R710 server configures remote control card
We configure the remote control card in the server, and open the remote card interface through the browser and the network, which is equivalent to operating the server in front of the server (including the startup process can be seen). Remote control cards include independent and integrated control cards (independent can watch the startup process), independent control cards are recommended.
1. The server is plugged into an independent remote control card to start the server
2. Start to enter the remote control card configuration interface
3. Set IP address and user password
4. If you want to turn it on, press F1 and turn this off in BIOS.
5. Enter the IP address to access. If you are in a non-local computer room, use the × × method.
