Solutions that cannot be used by USB after installing win7 in Tianyi 510pro-practical supplementary instructions

Reference reprint link: Tianyi 510pro

Premise: a. In the Chinese cabbage PE U disk (the size is more than 8G), add the installation image ISO file of the flagship version of WIN7 to the ISO file, and put the driver folder x64 and Autounattend.xml file in the root directory of the U disk.

B, there are integrated graphics cards and independent graphics cards in the computer. When you press F2 or F12Q to switch BIOS, you need to connect the monitor to the independent graphics card first.

Practical instructions for partitioning the disk using the PE tool

The computer hardware contains two hard drives, HD0 and HD1,HD0 are data disks (size 1T) and HD1 is system disks (size 120g). Do not partition HD0. After modifying the partition format of HD0 to MBR, save the changes, and partition and format the whole HD0 disk, and automatically assign the drive letter to C.

The above operations can guarantee: 1. When the system starts, it will not boot from HD0 by default.

2. The use of disk HD0 can be manually divided and formatted in disk management after the system is installed, and then used.

3. It can be guaranteed that the green remote point will be checked after MER, BOOTMGR PBR and BOOT FLAG in the WinNTSetup tool operation interface.

Use WinNTSetup tools to install the system

First of all, you need to load the installation image of the system with the virtual optical drive on the PE system. The location of the install.wim file in the WinNTSetup tool needs to be selected from the virtual optical drive. Click to start the installation, in "are you ready?" The interface check "automatically restart the computer after successful installation".

Third, after the completion of the system installation, during the restart process, there may be

Can't boot from any HDD

Try the solution is: 1, change the USB3.0 flash drive.

2. Change to an ISO image of WIN7 flagship version.

3. 1-2 group method.

It may also appear:

Can't boot from any HDD.Start booting from USB devices...

The workaround is to load the ISO image from the virtual CD drive on the PE desktop, not from the USB CD drive.

There are wired network cards and wireless network cards in the computer

When downloading the universal network card driver, it is best to drive the wired network card and wireless network card at the same time.