Red Flag Linux system installation tutorial

If you are used to the Windows system, will you want to try something new and try the Linux system? The following experience applies to both virtual machines and real machines. Tools / raw materials

Computer

Linux system image package

Method / step 1:

First write the image to the CD or U disk, and then go to bios to set the first boot of the CD-ROM drive.

Press enter or wait about 10 seconds

Select the first item after startup

Method / step 2:

Wait for the white progress bar below to finish.

Method / step 3:

Click on the icon of the hard drive so that you can boot from your DVD

Method / step 4:

Select the time zone, keyboard and language on the primary settings page

Method / step 5:

After that, you can enter the interface similar to Windows PE, where you can first experience the Linux operating system.

Method / step 6:

At this time, the system will automatically pop up this page and click to start the installation.

Method / step 7:

You will be prompted to choose the language in the installation process, either simplified Chinese or English

Method / step 8:

Here is the license certificate. Go through it carefully and choose to accept it, then click next.

Method / step 9:

Choose the advanced installation method here.

Method / step 10:

Partition here, be sure to divide an ext3 partition as the system disk, a linux-swap as the exchange area, and the rest at will

Keep in mind that the mount point of the system disk is "/" (excluding quotation marks)

Method / step 11:

There will be a pre-installation summary, that is, parameter confirmation.

Click next after confirming that there are no problems.

Method / step 12:

In this way, the installer is officially started!

Just wait for the progress bar below to finish.

Method / step 13:

After installation, restart the system, then you can unplug the USB disk or CD-rom. If you do not unplug, choose the last option to boot from the hard disk.

Method / step 14:

After turning on the machine, click the small triangle on the right to log in to the desktop!

Method / step 15:

Now that the system is installed, explore the world of Linux!