What if the hard disk partition table of windows is broken?

Editor to share with you what to do if the hard disk partition table of windows is broken. I hope you will get something after reading this article. Let's discuss it together.

1. Start to make U disk boot disk, use U disk boot disk to enter PE system

two。 Insert the boot USB disk into the computer, and set the computer to start with the USB disk after boot.

3. Directly select the first entry to enter the PE system in the interface that appears.

4. Open the partition tool on the desktop, select the hard drive whose partition table is broken, and start "bad path detection and repair".

5. Directly select the disk to be tested in the interface, set the cylinder range according to your needs, and then "start testing".

6. After the detection is completed, if there are no bad channels, close the window directly, if there are bad channels, the detection speed will slow down, and finally prompt the number of bad channels detected.

7. Start "trying to fix" the bad path.

8. When repairing, it will destroy the data near the bad track. It is recommended to back up the data in advance, and try not to store data on the disk where the bad path appears after the repair is completed, so as to avoid data loss. If the repair is successful, place the mouse over the damaged area, and the partition tool will prompt "repaired".

After the final repair is completed, the computer will report the number of bad paths repaired, and the repair is successful.

After reading this article, I believe you have a certain understanding of "what to do if the hard disk partition table of windows is broken". If you want to know more about it, you are welcome to follow the industry information channel. Thank you for reading!